Specifications

Page 57
FIREFINDER SERIES II INSTALLATION, COMMISSIONING &
OPERATION
9 The Main Menu
The MAIN MENU is accessed by pressing MENU.
Figure 60: The Main Menu
Numbering System:  denotes the menu structure number and  denotes the sub-menu
numbering.
Pressing the appropriate number on the keypad while in the MAIN MENU the user can view any;
 FIRE ALARMS
 PRE-ALARMS
 FAULTS; Pressing  brings up a sub-menu from which a more detailed description of the fault
can be displayed. With a Fault present select a field ( to ) to view details of the fault.

Zones Sensors

Loops

Modules

Comms

Power Supply

Brigade

Test Failures

Sounders
 DISABLES on the system.
If there are no alarms, pre-alarms, faults or disables, a message, e.g. NO ZONES OR SENSORS IN
ALARM, will be displayed for 1 to 2 seconds and then the display will return to the Main menu.
9.1 Status Menu
 Is pressed to gain access to the STATUS MENU.
Figure 61: The Status Menu
From the STATUS MENU the status of system components and settings can be selected and
displayed as listed below. Note that different screens are displayed for a system with and without
networking.
Press
 Loops: Enter the loop number and the LCD will display its status, e.g. normal, type of fault etc.
 Modules: Select the type of module, Slave, P/S, Brigade or External LED Mimic
and follow the screen prompts to display the status of the selected field.
 I/O: The LCD will display the status of an input or output in a panel or on a loop.
Enter (i) the I/O controller number then the input or output on that controller or, (ii) the loop and
sensor number and the output on that device.
Once entered the LCD will then display a description of what that input or output does and its current
state.
STATUS MENU
0: LOOPS 1 :MODULES 2: I/O
3 :SYSTEM 4: AVALUES
SELECT NO.
AC: 3S ALM: 000 PALM: 000 FLT: 000 DIS: 000
MAIN MENU
0: ALARMS 1 :PREALARMS 2: FAULTS 3: DISABLES
4:STATUS 5 :TEST 6: SOUNDERS 7: PRINTER:
SELECT NO.
AC: 2S ALM: 000 PALM: 000 FLT: 000 DIS: 000