Quick Start Guide

Programming
Button
LED Indicator
Reset
Button
RS485 Interface Power (5V/1A)
INTEGRATIONS
+ MORE
INTEGRATIONS
+ MORE
INTEGRATIONS
+ MORE
Product Parameter
Status Indicator
Programming / Pairing
Press and hold programming button for about 2 seconds, then release until the LED blinks purple.
Reset
Press and hold programming button for about 10 seconds, then release until the LED blinks red.
AMP
™
Bridge
Input Voltage
5V DC (USB Type A)
Input Power
1000mA
WiFi Network
2.4Ghz only (802.1 1b/n/g)
Shade Control Frequency
433.92 Mhz
Range
30 meters or 98 feet
Protection Class
IP20
Operation Temperature
32˚F to 104˚F (0˚C to 40˚C)
Integration
RS485 (Optional)
Status Indicator
Color
Duration
Meaning
Constant
Continuously till status change
Continuously till status change
5 times
Continuously till status change
Continuously till status change
Working fine
Wi-Fi is disconnected
Wi-Fi is connected
Bridge reset
Pairing underway
Upgrade in progress
Constant Blue
Slow Flashing Red
Slow Flashing Yellow
Quick Flashing Red
Slow Flashing Purple
Slow Flashing Green
Product Parameter
Input Voltage 5V DC ((UUSSBB TTyyppee AA))
Input Power 1000mA
WiFi Network 2.4Ghz only ((880022..11 11bb//nn//gg))
Shade Control Frequency 433.92 Mhz
Range 30 meters or 98 feet
Protection Class IP20
Operation Temperature 32°F to 104°F ((00°°CC ttoo 4400°°CC))
Programming / Pairing:
Press and hold programming button for about 2 seconds, then release until the LED blinks purple.
Reset:
Press and hold programming button for about 10 seconds, then release until the LED blinks red.
3rd Party Integration
*Additional 3rd party integration programs available.