Owners manual

www.amp-research.com
5/12
IM75101 rev 01.31.18
AMP RESEARCH POWERSTEP
TM
– DODGE RAM
1
3 4
5
2
6 7
FRONT
13
3
10
DRIVER REAR BRACKET SHOWN
Prepare brackets for install
NOTE FOR MEGA CAB:
Remove tape and cut as
indicated for Mega Cab
rear driver bracket if not
already done.
Install rear mounting bracket
13
3
10
TABS REST ON EDGE
TORQUE
16 ft-lbs. (22 N-m)
13 mm
(PULL BACK ON BOLT
WHILE TIGHTENING)
13
3
10
Fasten down rear mounting bracket
After drilling apply
paint to prevent
rusting.
Bracket must be flush with the
sidewall before riveting.
X2
12
TORQUE
1.5 ft-lbs. (2 N-m)
1/8"
Note: Steps 1-8 shown on driver side.
Repeat these steps on passenger side.
Counting large oval sill holes from the front,
remove covering (plug or tape) from the
below indicated mounting points.
QUAD CAB: 3rd and 7th from the front.
MEGA CAB: 3rd and 8th from the front.
1/8”