Owners manual

www.amp-research.com
10/12
IM75101 rev 01.31.18
AMP RESEARCH POWERSTEP
TM
– DODGE RAM
Strip 3/8”
Insert and
Tighten
Strip 3/8”
Insert and
Tighten
(Drive/Rear)
(Drive/Front)
On each side of the vehicle measure from the front edge
of door line on the pinch weld to the specied lengths
below. Measure at 26” for the front LED Light and 58” for
the rear LED Light.
58”
26”
27
26
28 29
30
31
VT/WT
VT/WT
VT/YL
VT/YL
VT/GY
VT/GY
VT
VT
TN/RD
VT/WT
TN/Y
VT/YL
VT/OR
VT/GY
TN
VT
7
14
2X BOTH SIDES
7
REINSTALL FUSE
6
7
2X BOTH SIDES
Using supplied Posi-
Taps
TM
splice the Power
Step trigger wires into
their corresponding
door ajar wire. See
steps 26 and 27 for wire
colors.
Note: You may nd two VL/YL wires in
bundle. Only one works correctly.
(Pass/Front) (Pass/Rear)
(Drive/Rear)
(Drive/Front)
(Pass/Rear)
(Pass/Front)
Model Years 2004- 2009
Model Years 2002- 2003