Installation Guide

[e-mail] • 813.978.3900
Product Dimensions
–3–
Install Fixture
1
Package Contents
4 1/8”
6 5/8”
4.68”
Determine the desired location
for the xture. Place the washers
onto the self-tapping screws. Pass
the self-tapping screws through
the holes of the feet of xture and
spacers. Thread the self-tapping
screws into the desired location to
secure the xture.
NOTE: Anchors are required for
brick walls or concrete walls. To
determine the locations for the
anchors place the feet of the xture
onto your desired location and mark
points from the holes of the feet.
A. (1) Fixture
B. (3) Screws
C. (3) Spacers
Self-tapping Screw
Washer (optional, not supplied)
Anchor (optional,
not supplied)
Foot
Spacer
Fixture