Installation Manual

rev 04.22.16
6/7
www.amp-research.com
A M P R E S E A R C H B E D X - T E N D E R ™
1
A M P R E S E A R C H B E D X - T E N D E R ™
9
10
When the BEDXTENDER is at the furthest rear position, push down on the buckle to insert into
tailgate latch. Tighten straps. To release, pull tailgate handle.
NOTE: Ensure that buckles are properly inserted into
latches by pulling on the straps after both buckles have
been inserted.
Adjust Strap Buckles to lock into the tailgate when BEDXTENDER is deployed.
Your assembly is now complete.