User's Manual

Phone: [phone] | Fax: [phone] | E-mail: [e-mail]
Address : 1879 Lundy Ave, ste. 138, San Jose, CA 95131
电话：[phone] | 传真：[phone] 转 111 | E-mail: [e-mail]
地址：天津市华苑产业区海泰西路 18 号西 3B-202（300384）
5
2 Hardware Specifications
General Conditions (V
IN
= 2.5V and 25°C)
2.1 Recommended Operating Conditions
Rating Min Typical Max Unit
Operating Temperature Range -40 - 85 °C
Supply Voltage V
IN
2.2 2.5 4.8 Volts
Signal Pin Voltage - 1.9 - Volts
RF Frequency 2400 - 2483.5 MHz
2.2 Absolute Maximum Ratings
Rating Min Typical Max Unit
Storage temperature range -55 - +150 °C
Supply voltage V
IN
-0.3 - +5.0 Volts
I/O pin voltage V
IO
-0.3 - +5.5 Volts
RF input power - - -5 dBm
2.3 Current Consumption
Standard CPU Mode, 8 MHz
 UART supports up to 115 Kbps
 Data throughput up to 200 Kbps
 abSerial v1.7 (firmware)
 Shallow Sleep enabled
Modes (Typical Power Consumption)
A
vg Unit
ACL data 115K Baud UART at max throughput (Master) 16.5 mA
ACL data 115K Baud UART at max throughput (Slave) 18.5 mA
Connection, no data traffic, master 5.2 mA
Connection, no data traffic, slave 7.4 mA
Connection, 375ms sniff, slave 590 µA
Standby, without deep sleep 4.9 mA
Standby, with deep sleep 140 uA
Page/Inquiry Scan, with deep sleep 720 µA
BLE Advertising, 1.28s, non-connectable 195 µA
BLE Advertising, 1.28s, discoverable 215 µA