User's Manual

Phone: [phone] | Fax: [phone] | E-mail: [e-mail]
Address : 1879 Lundy Ave, ste. 138, San Jose, CA 95131
电话：[phone] | 传真：[phone] 转 111 | E-mail: [e-mail]
地址：天津市华苑产业区海泰西路 18 号西 3B-202（300384）
BT53 Product Specification
11.6mm x 13.5mm
Description
Our micro-sized Bluetooth module, with
integrated antenna, is the smallest form factor
available providing a complete RF platform. The
BT53 is supports both Bluetooth Classic and Low
Energy, version v4.0.
The BT53 is a surface mount PCB module that
provides fully embedded, ready to use Bluetooth
wireless technology. Our standard abSerial and
Amp’edUP Stack are pre-flashed into the
integrated flash memory, supporting the
SPPprofile. Other standard Bluetooth profiles are
also available.
Customized firmware for peripheral device
interaction, power optimization, security, and
other proprietary features may be supported and
can be ordered pre-loaded and configured.
BT53 Features
Bluetooth features
 FCC &Bluetooth licensed radio
 Bluetooth v4.0
 Class 1 radio
 Range up to 80m LOS
 1.5Mbps data throughput
 128-bit encryption security
Hardware configuration
 Cortex-M4microprocessor up to 84MHz
 256K bytes Flash memory
 64K bytes RAM memory
 UART, up to 2M baud
 SPI and I2C interfaces
 7 general purpose I/O
 4x12-bit A/D inputs
 1 LPO input
Embedded software
 Amp’edUPdual mode Bluetooth stack: BT
Classic and BT Low Energy
 abSerial, AT command set
 SDK, Software Development Kit (Optional)
 BlueGuard, data encryption software (Optional)
 Mobile application software (Optional)
Additional documentation
 abSerial User Guide
 abSerial Reference Guide
 abSerial Configuration Guide