User's Manual

Phone: [phone] | Fax: [phone] | E-mail: [e-mail]
Address : 1879 Lundy Ave, ste. 138, San Jose, CA 95131
电话：[phone] | 传真：[phone] 转 111 | E-mail: [e-mail]
地址：天津市华苑产业区海泰西路 18 号西 3B-202（300384）
3
Table of Contents
1 Software Architecture
1.1 Lower Layer Stack
 Bluetooth v4.0, Classic and Low Energy
 Device power modes: active, sleep and deep sleep
 Wake on Bluetooth feature optimized power consumption of host CPU
 Authentication and encryption
 Encryption key length from 8 to 128 bits
 Persistent FLASH memory for BD Address and user parameter storage
 All ACL packet types.
 Bluetooth test modes per Bluetooth specification
 802.11b/g/n co-existence: AFH
 Vendor specific HCI commands to support device configuration and certification test modes
1.2 Upper Layer Stack: Amp’ed UP
 SPP, GAP, ATT, GATT
 RFComm, SDP, and L2CAP
1.3 HCI Interface
 Bluetooth v4.0 specification compliant
 HCI UART transport layer (H4)
1.4 AT Command Set: abSerial
 Please see abSerial Reference Guide for details