Instruction Manual

3. Connect now the ACCM to the OBDII connector in the car. The OBD port is generally
located in the driver cabin, between the door and the steering column.
4. Place the NFC reader (optional) on the bottom left corner of the windscreen.
Use the provided sticker and tape to fix the reader on the windscreen.
Place the sticker on the windscreen and use the tape to fix the reader on
the sticker. The white side of the reader must be faced to the car.
Then Connect the NFC reader to the fuse cable extension
Then connect the fuse cable to the CSM connector.
For your own convenience, you can also decide to place the reader
on the top left corner of the windscreen.
5. Reconnect the vehicle battery.
6. Validate that the
ACCM or ACCM+ has a power connection (LEDs on side). You are now ready
to test the
ACCM with a virtual key on a smartphone equipped with the OTA keys mobile application.
7. Fix the
ACCM or ACCM+ behind the dashboard.
Manufactured by: AMOTECH
Address: 5BL-1LOT, 380, Namdongseo-ro, Namdong-gu, Incheon, Korea 21629