Quick Start Guide

1. Package Contents
amor Stethoscope Recording Device
Ÿ
Quick start guide / Warranty card
Ÿ
Type-C USB charging cable
Ÿ
Kits
Ÿ
2. Getting to know amor Stethoscope Recording
Device
Chestpiece connector
Physical button
(Power / Record)
OLED touch screen Product label
USB Type-C port
(Charging / data
transmission)
Tubing connector
1. Remove the screws on
the upper cover of the
device (2 in total)
2. Open the chestpiece
lock cover under the
device
3. Separate the chestpiece
on the stethoscope from
the tubing
4. Install the O’Ring in the
Kits to the chestpiece
3. Product Assembly
5. Insert the stethoscope
into the amor
Stethoscope Recording
Device in the direction
shown below
6. Reinstall the chestpiece
lock cover under the
device
7. Screw back the screws
on the top cover of the
device (2 in total)
8. Confirm that the
chestpiece can be
rotated smoothly. If not,
please repeat steps 5~7
This product does not contain a stethoscope (chestpiece, tubing
and headset); users can use it with their own stethoscope
4. Install amor Sound Logger APP
1. Please search for amor Sound Logger in App Store / Google
Play, or use the QR Code below to download and install the
App.
Android iOS
This product works with devices that support BLE 4.2 or later.
2. If you need to install software on the PC, please contact your
local dealer or the original service center.
5. Power on and Pair with a Smartphone
1. Long press the physical button for 2 seconds to turn on amor
Stethoscope Recording Device.
2. Launch the APP on the smartphone and follow the
instructions below to pair the device.
When you launch the APP
for the first time, you need
to agree to the disclaimer
Searching for device
(The product serial
number can be found on
the label on the retail box)
Pairing the device with
your smartphone
Pairing succeeded
(Users can name this
device by themselves)
6. Using the Device
1. When the APP is connected to the device:
Press the physical button on the device to start recording and
transfer the data to the APP via Bluetooth in real time.
2. When the APP and the device are not connected:
After the device is turned on, press the physical button to
start recording and store it in the internal SD Card of the
device.
(This product does not block or adjust the sound signal. If the
device is not turned on, it will not affect the use of the
stethoscope.)