User manual

1
2
6
3
5
4
7
8
0
9
Basic Operation
6
5
Auto Search
Press "EXIT" button to stop the auto search, but you are
recommended not to stop it during the search process since the
initial autoinstallation functions only once.
You do not need to do anything during the auto search.
After the auto search finished, the finishing sign menu will display on the screen. Then the TV will
display at channel one.
Initial Auto Installation
●
Press "VOL+/VOL- " buttons to increase or decrease the speaker volume.
Note: It is the same way to increase and decrease the earphone volume when
the earphone is connected.
Volume Adjust
●
●
●
Number
Channel Shift
Direct Select
Select a one-digit channel: Press 0-9 directly to select your desired channel.
Select two-digit channel: Press 1-9 to input the first digit and press 0-9 to
input the second digit.
In TV mode, press "CH+" button to select next channel, and press "CH-" button to
select previous channel.
●
CH+/-
CH+
CH-
VOL+/-
－
VOL
＋
VOL
Display Status
i
Display
i
Display
i
Display
●
●
●
●
Press "DISPLAY" button, the screen will display the information of the Current source.
In TV mode, press the " " button, the screen will display the Current channel
number/Channel name/Sound System/Dual Mode/Mute Status/Freeze Status.
In PC / Component / HDMI mode, press the " " button, the screen will display
Resolution/ Source/Mute Status/Freeze Status.
In other modes different from above, the screen will display Source/Mute Status/
Freeze Status.
-16-
Press this button to toggle between current and last channel.
Last channel
Auto Search
Current Channel 9
104.25MHz
Volume
40
VIDEO OFF
Press this button to enjoy music without video, and again to resume.
●
Close Video