User Manual

-53-
backlight comes on when you open your phone and switches off if no
key is pressed within the set time.
10 seconds/20 seconds/40 seconds
Always on: It is equal that the set time is 40 seconds.
Note: In stand-by mode, you can enter this menu by pressing ‘* 0 #’.
4-2-4. Auto On/Off
The phone will switch on or off at the preset time.
Enable: Enable the automatic power on/off of the phone.
Set time: Enter the time when you want your phone to switch on/off.
4-2-5. Reset all
You can reset some settings to factory setting. You need to enter
Password (PWD).
4-3. Call
4-3-1. Incoming filter: With this feature, you can put numbers into
the Reject Number list whereby calls from numbers on this list will
never get through to your phone; and put numbers into the Accept
Number list so that any calls from this list can get through and the
others can not.
4-3-1-1. Call reject
󰷅󰷅
The phone will refuse calls from the
numbers in the “Reject Number”; you can get the prompt information
in the standby mode when someone calls you with these numbers; you
can also check all the record of rejected calls in the “Reject list ”.
4-3-1-2.Call acceptYour phone can be reached only from the
numbers you put into the Accept number. When receiving a call
from a number not in the Call accept list, your phone displays “this
number is rejected”. You can also check all the Accept calls in the
“Accept list”. 󰷅
Note: This function is available only when your SIM card gets the Caller
Line Identification Service. Or not, the phone will be available for all
calls from any numbers.