User Manual

5.3 LED Status:
Symbol LED Status Description
1. Stand-by mode
Light 0.1 second every 8 seconds
( 0.1 sec On→ 7.9 sec OFF)
Bluetooth
Blue
2. Connected
Blinking one time every two seconds
(0.5 sec ON→ 1.5 sec OFF)
1. Acquisition Steady light
2. Tracking
Blinking every 8 seconds
(7.9 sec On→ 0.1 sec OFF)
GPS
Green
3. GPS position fix
Blinking every 2 seconds
(0.5 sec ON→ 1.5 sec OFF)
1. In normal OFF
2. In low battery
Blinking
(0.5 sec ON→ 1.5 sec OFF)
Battery
Red
3. In charging Steady light
5.4 Usage:
5.4.1 To turn on theABG33868 GPS receiver:
When turn on the power of ABG33868, all the LED lights will blink one time. When
there is a host Bluetooth device enables the connection between the Bluetooth and
ABG33868, the blue LED will blink once every two seconds. When switch the
power of the ABG33868 on, the GPS receiver will start to acquire the satellites. No
matter the ABG33868 gets the position fix or not, if there is no connection between
the Bluetooth device and the ABG33868, the Bluetooth GPS will turn off the GPS in
five minutes.
For better satellite acquisition, make sure that the GPS receiver is in clear view of
the sky without any obstruction for better satellite acquiring.
When the connection between the Bluetooth device and ABG33868 is established,
the GPS tools or navigation software can be run and the Bluetooth GPS receiver will
start to transfer the NMEA data to Bluetooth device.
5.4.2 Connection:
5.4.2-1 Connect to PDA:
ABG33868 supports Bluetooth Serial Port Profile V1.1, works with any