User Manual

5.4.2.-2 Verify the connection
Once you install the GPS View from the Installation CD, you can run the GPS
View by click “GPS View” from the Program Files. After you run the GPS
View, you will see a window below.
12. Press the BT-GPS:xxxx icon
for 2 – 3 seconds, it will
pop-up a menu
13. Select the Connect from the
menu to build the connection
14. Once the connection is built,
the BT-GPS:xxxx icon will
become green color
1. Scan: To detect GPS
receiver connected COM
port (You may select the
COM port from the
pull-down menu
2. Once the COM port has
selected, press the Open
button to open the COM
port.
3. The NMEA will be rolling
on the NMEA window
NMEA
Window