User's Manual

4.3 LED Status:
Symbol LED Status Description
1. Stand-by mode
Light 0.1 second every 8 seconds
( 0.1 sec On→ 7.9 sec OFF)
Bluetooth
Blue
2. Connected
Blinking one time every two seconds
(0.5 sec ON→ 1.5 sec OFF)
1. Acquisition Steady light
2. Tracking
Blinking every 8 seconds
(7.9 sec On→ 0.1 sec OFF)
GPS
Green
3. GPS position fix
Blinking every 2 seconds
(0.5 sec ON→ 1.5 sec OFF)
1. In normal OFF
2. In low battery
Blinking
(0.5 sec ON→ 1.5 sec OFF)
Battery
Red
3. In charging Steady light
4.4 Usage:
4.4.1 To turn on the ABG10868:
When turn on the power of ABG10868, all the LED lights will blink one time. When
there is a host Bluetooth device enables the connection between the Bluetooth and
ABG10868, the blue LED will blink once every two seconds. When switch the
power of the ABG10868 Bluetooth GPS receiver on, the GPS receiver will start to
acquire the satellites. No matter the ABG10868 get the position fix or not, if there is
no connection between the Bluetooth device and the ABG10868, the ABG10868
will turn off the GPS in five minutes.
For better satellite acquisition, make sure that the GPS receiver is in clear view of
the sky without any obstruction for better satellite acquiring.
When the connection between the Bluetooth device and ABG10868 is established,
the GPS tools or navigation software can be run and the Bluetooth GPS receiver will
start to transfer the NMEA data to Bluetooth device.