User's Manual

Date:2008/09/10
Version: 1.401
Status: Released
6/11 ACM8060 Product Data Sheet V1.4©Copyright 2008, Amod Technology
4 SIMRST
5 SIMDET SIM Card Detector, can be used as GPIO
6 GND Ground
7 PCMDI PCM data input
8 PCMFSO PCM frame synchronization
9 PCMCLK PCM clk
10 PCMDO PCM data output
11 ADC1 Adc1
12 BATTEMP Adc2 （bat temp）
13 GPIO3 GPIO
14 TXD1 UART1 Data Output
15 TXD0 UART0 Data Output
16 RXD1 UART1 Data Input
17 RXD0 UART0 Data Input
18 VCHAGE
Charging interrupt detection, also can be used as
charging pin with current limit under 400Ma.
19 VCHAGE
Charging interrupt detection, also can be used as
charging pin with current limit under 400Ma.
20 CHV_DRV CHV_DRV charging control
21 GND
22 GND
23 GND
24 GND
25 GND
Ground
26 VBAT
27 VBAT
28 VBAT
29 VBAT
30 VBAT
Power input positive, input voltage is limited to
3.5V~4.5V.
31 V1.8 1.8V Power output with load of 50mA
32 RI0
UART0 ring tone indicator output, can also be
used as GPIO or interrupt.
33 DTR0 UART0 Ready to receive, can be used as GPIO
34 CTS0 UART0 Permission to sent
35 DSR0
UART0 Ready to receive, can be used as GPIO
or interrupt
36 IICSCL NC
37 RTS0 UART0 Request to send (Output)
38 IICSDA NC
39 DCD0 UART0
40 CHV_MAX NC
41 ON_KEY
Power On/OFF signal. Effective at low. Required
100ms above power level
42 GND
43 MIC1_P Mic 1 in positive