User's Manual

- xii -
Preface
General Cleaning Tips
You may need the following precautions before you begin to clean the device. When
you clean any single part or component for the device, please thoroughly read and
understand the details below.
1. We strongly recommended that you should shut down the system before you
start to clean.
2. When you need to clean the device, please rub it with a piece of dry cloth.
3. Never get circuit board damp or wet.
4. Be cautious of all kinds of cleaning solvents or chemicals when you use it
for the sake of cleaning. Some individuals may be allergic to the ingredients.
5. Try not to put any food, drink or cigarette around the device.
Cleaning Tools
Although many companies have created products to help improve the process of
cleaning your devices and peripherals, users can also use household items to clean
their devices and peripherals. Below is a listing of items you may need or want to use
while cleaning your devices or peripherals. Keep in mind that some components in
your device may only be able to be cleaned using a product designed for cleaning
that component, if this is the case it will be mentioned in the cleaning.
• Cloth: A piece of cloth is the best tool to use when rubbing up a component.
Although paper towels or tissues can be used on most hardware as well, we
still recommend you to rub it with a piece of cloth.
• Water or rubbing alcohol: You may moisten a piece of cloth a bit with some
water or rubbing alcohol and rub it on the device. Unknown solvents may
be harmful to the plastics parts.
• Cotton swabs: Cotton swaps moistened with rubbing alcohol or water are
excellent tools for wiping hard to reach areas in your keyboard, mouse, and
other locations.
• Foam swabs: Whenever possible, it is better to use lint-free swabs such as
foam swabs.