Owner's manual

Assembly Instructions

with Parts Identification

READ these instructions before placing unit in

service. KEEP these and other materials delivered

with the unit in a binder near the machine for

ease of reference by supervisors and operators.

2500 • 2510 • 2515

Single Brake Lathe

Benches; Sign Kit

1601 J. P. Hennessy Drive, LaVergne, TN USA 37086 615/641-7533 800/688-6359 Manual Part No.: 940058 02

HENNESSY INDUSTRIES INC. Manufacturer of AMMCO

, COATS

and BADA

Automotive Service Equipment and Tools. Revision: 06/02

PAGE 1
® 2500 • 2510 • 2515 Single Brake Lathe Benches; Sign Kit Assembly Instructions with Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference by supervisors and operators. 1601 J. P. Hennessy Drive, LaVergne, TN USA 37086 615/641-7533 800/688-6359 HENNESSY INDUSTRIES INC. Manufacturer of AMMCO®, COATS® and BADA® Automotive Service Equipment and Tools. Manual Part No.
PAGE 2
Brake Lathes When You Receive Your Bench Unpack the bench parts and check them against the parts list on the last page of this manual. Make sure you have all the parts listed – and the quantities listed. Report any shortages immediately. Preparing the Bench for Use 1. Carefully lay the bench on its side. 2. Screw a leveling foot into the threaded hole located at each corner of the bench (4 locations). 3.
PAGE 3
Brake Lathes Parts Identification Quantity Item 1 2 3 4 5 6 7 8 9 10 * Part 940062 923749 923748 924100 940055 924557 925255 940056 925237 -------909966 2500 2510 2515 4 1 1 16 1 16 1 2 2 4 1 1 2 -2 ---- ---14 1 14 1 2 2 not available separately 35 20 15 Description Adjustable Foot Chip Bucket Chip Funnel 1/4-20 x 3/4 Truss Head Screw Tool Board, Short 1/4-20 Hex Flange Serrated Face Nut Sign Upright Bracket Base Weldment Storage Hook * Item not shown 2500/2510/2515 Lathe Benches • 3