Machines APH SERIES aph hydrostatic vibratory plates
The right fit on your jobsite Ammann APH Hydrostatic Vibratory plates Ammann APH Hydrostatic Vibratory Plates deliver compaction power and productivity to jobsites. The plates have drive and climbing power, even when working in cohesive soils. The compactors enable smooth directional changes and easy operation, even by the inexperienced. Operators can adjust to jobsite conditions by simply regulating the engine revolutions.
APH 5030 APH 6530 Weight: 375–408 kg Working width: 450–750 mm Centrifugal force: 50 kN Weight: 491–527 kg Working width: 550–850 mm Centrifugal force: 65 kN APH 100-20 APH 110-95 Weight: 675–727 kg Working width: 650–950 mm Centrifugal force: 80 kN Weight: 778–830 kg Working width: 650–950 mm Centrifugal force: 110 kN 3
Your benefits at a glance What sets Ammann Hydrostatic vibratory plates apart? Hydrostatic drive The APH line features a fully hydrostatic system that doesn’t require V-belts or a centrifugal clutch and the maintenance that goes with them. A hydraulic motor drives the eccentric shafts. An orbitrol controls the adjustment of the centrifugal weights, allowing a smooth change of direction. Long Life The plates are built to last, starting with strict manufacturing standards in Germany.
LOWEST HAND ARM VIBRATION The standard hand guide for APH is vibration isolated to keep hand-armvibration to a minimum. With emissions of less than 2.5 m/s2 (excl. APH 100-20) enable the APH vibratory plates long workshifts without stress to the operator or the need of documentation for operator safety reasons.
Technical solutions for your jobsite CUSTOMISED FOR YOUR NEEDS Quality and productivity need to be built into every machine. Ammann machines have both, and they also are easy to operate. DEAD-MANS HANDLE E-START Electronic sensors automatically stop the machine when the operator looses its grip. The plate remains in idle and only resumes working when the operator regains hold of the handle, meaning the tiresome process of restarting the engine is avoided every time the handle is released.
ACE compaction expert Big technology in a small package APH Hydrostatic Vibratory Plates can be equipped with the well-known Ammann Compaction Expert (ACE), an automated compaction measurement and control system. The ACE system on the vibratory plates utilises the well developed technology used in Ammann’s heavy compaction machines for years. It provides operators with an accurate indication of soil stiffness and whether desired compaction has been achieved. The benefits of ACE technology are significant.
“ Hand-arm-vibrations of less than 2.5 m/s2 preserve the operator and enable long working shifts.
APH 5020 APH 6020 A TRUSTED COMPACTOR TRUSTED AND RELIABLE The APH 5020 Hydrostatic Plate Compactor features a two-shaft exciter system that packs powerful compaction forces. This machine is highly reliable and trusted in the marketplace because of its robust design and long component life. The APH 6020 is a heavier version of the popular APH 5020. Weighing from 482 kg to 518 kg, the AP 6020 also features a two-shaft exciter system and the efficient and powerful compaction it brings.
APH 1000 TC THE REMOTE CONTROLLED COMPACTION PLATE The APH 1000 TC is an IR remote-controlled hydrostatic plate that can go where others can’t. The IR remote abilities ensure operation under the toughest conditions – and in the tightest spaces and deepest trenches. The operator is able to steer the vibratory plate from a safe distance with a remote control or cable remote.
its large range of “With vibratory plates Ammann offers you the suitable machine designated to your needs.
triple “Ammann shaft exciter system provides unmatched compaction results to the APH Vibratory plates.” Ammann Triple shaft exciter unit Market leading triple shaft exciter system gives Ammann APH vibratory Plates the extra edge when conditions get tough Ammann remains the technological leader in plate compaction with its patented triple-shaft exciter system.
APH 5030 APH 6530 COMPACTION POWER COMBINED WITH CLIMBING ABILITIES CLIMBING AND PERFORMING This hydrostatic vibratory plate compactor distinguishes itself with its high compaction power and climbing ability. The APH 6530 is another powerful performer that delivers compaction force every step of the way.
APH 100-20 A HEAVY HITTER The weight of the APH 100-20 combines with the industry-leading three-shaft exciter system to provide performance, climbing ability and responsiveness. The vibratory plate weighs from 675 kg to 727 kg. Several options, such as extension plates, operation hour meter and dead man’s handle allow for customisation to make the plate fit your particular needs.
“ The APH 110-95 is a vibratory plates for professionals – with plenty of compaction power to manage hard work on a daily basis.
Specification APH Vibratory Plates F E D APH 5020 A G B H WEIGHT & DIMENSIONS MACHINE WEIGHT BASIC UNIT C APH 5020 APH 6020 367 kg 482 kg with extension plates 75 mm 388 kg 506 kg with extension plates 150 mm 400 kg 518 kg 450 mm 470 mm A Base plate length B Machine length C with handle D Machine height 775 mm 870 mm E Handle height (work) 1000 mm 1000 mm F Handle height (transport) 1380 mm 1500 mm G Machine width H with extension plates 900 mm 930 mm 1600 mm
E D C A F B G APH 1000TC WEIGHT & DIMENSIONS MACHINE WEIGHT BASIC UNIT with extension plates 75 mm A Base plate length APH 1000 TC 715 Kg 747 Kg 520 mm B Machine length 1090 mm C Machine height 845 mm D Machine height (w, transport hook) 910 mm E Machine width 696 mm F Base plate width 650 mm G with extensions 800 mm Engine ENGINE FUEL ENGINE OUTPUT AT RPM FUEL CONSUMPTION Hatz 1D90V Diesel 14.8 HP / 10.9 kW 3000 2.
F D A G B H E C APH 110-95 WEIGHT & DIMENSIONS MACHINE WEIGHT BASIC UNIT with extension plates 75 mm with extension plates 150 mm A Base plate length B Machine length C with handle D Machine height E F G Machine width APH 5030 APH 6530 APH 100-20 APH 110-95 375 kg 491 kg 675 kg 778 kg 396 kg 515 kg 704 kg 807 kg 408 kg 527 kg 727 kg 830 kg 450 mm 470 mm 520 mm 520 mm 1070 mm 900 mm 930 mm 1070 mm 1600 mm 1840 mm 1965 mm 1965 mm 775 mm 870 mm 900 mm 1000 mm H
QR Code on each “The machine leads to the Ammann Service App providing further technical information and videos.
Training Enhance Your Performance The Ammann International Training Centre in the Czech Republic is our training headquarters. If you are not able to visit the International Training Centre, Ammann will bring the training to your business or even a jobsite of your choosing. Machine Training Modules Main courses Modules help you organise your team’s training efforts. For example, you can have comprehensive lessons that put you on the path to expertise regarding a single machine.
Service A NETWORK TO SUPPORT YOU No matter where you are, Ammann-trained technicians and parts are nearby. Ammann dealers provide well-trained service technicians who can help you, whether it’s an emergency or time for preventive maintenance. The vast Ammann network ensures there is a nearby technician who understands your language and your technical needs. Parts availability and ease of ordering are always Ammann priorities. Service videos Sometimes a video tells the story best.
Spare parts You can only earn money when your equipment is working. That’s why Ammann does everything possible to ensure you have the parts where and when you need them. Those efforts include easy online ordering to avoid confusion and enable tracking, and efficient logistics and availability to help parts reach you quickly. Wearing kits Repair kits Some machines handle abrasive materials in demanding applications. While wear is inevitable, downtime can be limited.
kits ensure “Service that every part is there when you need it, while emergency kits prevent a little challenge from becoming a big one.
For additional product information and services please visit : www.ammann - group.com Specifications are subject to change. MPB-1583-00-EN | Copyright Ammann Group Images: © Ammann Group, www.fotopizza.
