Installation Guide

8
7.
X1
X1
X1
X1
X2
6FR02a
6FR02b
6FR02c
6FR02d
6FR02e
6FR02f
ST4.0x30
X1
05
X2
6FR05
3.0mm
6FR25 6FR26
2.5mm
X1
X1
e
f
g
h
i
j
k
l
a
b
c
d
-Put the glass clipper 6FR02c on the side panel, fasten the bottom of clipper with inner screws using hex hey 6FR26.
-Insert one side of support bar 6FR02a into the the glass clipper.
-Attach the wall bracket 6FR02d on the other side of support bar,ensure it is level by sprint level,and mark the position of wall bracket on
the wall.
-Take off the wall bracket from the support bar and mark the holes' position on the wall.
-Drill the holes(φ6mm)on the wall accordingly,and insert the wall plugs 6FR05(2x) into the holes.
-Fix the wall bracket seat 8FR02f on the wall with screws 6FR02e.
-Put the bottom cover 6FR02b on the glass clipper and fasten one side of support bar into glass clipper with inner screws using the hex
key 6FR26.
-Insert the other side of the support bar into the wall bracket 8FR02d and wall bracket seat 6FR02f, then fasten them with the inner
screw using hex key 6FR25.
6FR02c
6FR02d
6FR02b
6FR02a
6FR02e
6FR02f
6FR05