Installation Guide

6
3.
X1
X1
X1
X1
X2
8FR02a
8FR02b
8FR02c
8FR02d
8FR02e
8FR02f
ST4.0x30
X1
X2
8FR05
3.0mm
8FR09 8FR10
2.5mm
X1
X1
e
f
h
i
j
k
l
a
b
c
d
-Put the glass clipper 8FR02c on the panel, then fasten the bottom of clipper with inner screws using hex hey 8FR10.
-Insert one side of support bar 8FR02a into the the glass clipper.
-Attach the wall bracket 8FR02d on the other side of support bar, ensure it is level using a sprint level, and mark the
position of wall bracket on the wall.
-Take off the wall bracket from support bar and mark the holes' position on the wall.
-Drill the holes(φ6mm)on the wall accordingly,and insert the wall plugs 8FR05(2x) into the holes.
-Fix the wall bracket seat 8FR02f on the wall with screws 8FR02e.
-Put the bottom cover 8FR02b on the glass clipper and fasten one side of support bar into glass clipper with inner screws
with hex key 8FR10.
-Insert the other side of the support bar into wall bracket 8FR02d and wall bracket seat 8FR02f, and fasten them with inner
screw using hex key 8FR09.
8FR02c
8FR02d
8FR02b
8FR02a
8FR02e
8FR02f
g
8FR05