Installation Guide

8
8.
- Adjust the rollers by tool 6DS17 to make sure the door panels are vertical.
9.
X1
6DS17
X1
X1
X8
6DS02
6DS03
6DS11
6DS16
4mm
X1
-Remove the inner screws from the rollers with hex key 6DS16.
-Insert the door panels 6DS02 and 6DS03 into the bottom
sliding guides.
-Fasten the door panels and rollers together by inner screws.
-Cover the caps 6DS11(8x) in the back of rollers.
6DS11
6DS11
6DS02
6DS03