Installation Guide

2.
5
-Fix the sliding guides 6DS12(3x) on the bottom rail with screws
6DS13(6x).
-Cover the screws with caps 6DS14 (6x).
1
0
-Put the wall profile 6DS01(1x) against the wall and make sure it is
10mm
away from the outside edge.
-Adjust the wall profile and make sure it is level using a spirit level.
-Mark the holes on the wall, and drill the holes(φ6mm) according the
marks.
-Insert the wall plugs 6DS04(3x) into the holes.
-Fix the wall profile 6DS01(1x) on the wall with screws 6DS05(3x).
6DS09
6DS12
6DS13
6DS14
ST4*12
X3
X1
X6
X6
6DS01
6DS04
X3
X1
3.
6DS04
6DS12
6DS13
6DS14
φ6mm
6DS01
6DS05
6DS05
ST4*30
X3
3x
3x
3x
3x