User Guide

Power Button
LDX10 Batch Data Collection Handheld
Quick-Start Guide
Getting StartedGetting Started Getting Started
Physical Features 24-key Keypad
1
Charge the LDX10 for 6 hours
2
Starting up the LDX10
3
Download DC Console
800.648.4452
www.amltd.com
01132017-1
Power and Reboot Procedures
Use the supplied USB cable and power
adapter to charge from a 110VAC wall
outlet.
Scan Key
Power
Button
LCD
Scan Engine
Window
USB Port
T9 Keypad
Utilize DC Console to quickly modify existing
applications or create new ones and transfer
files from your LDX10 to your PC.
Download the DC Console utility at
www.amltd.com/Software/DC-Software
• If left idle for 30 minutes, the LDX10 will automatically
power down.
• Pressing the power button briefly, while the unit is on,
will either put the LDX10 into suspend mode, or wake it up
depending on its current state.
• Pressing and holding the power button for more
than 3 seconds causes the LDX10 to power off.
• Pressing the power button while the
LDX10 is OFF powers up and
re-boots the unit.
• While charging, the LDX10 display
will go dark after a time set in the
‘Display Properties’ settings in
Windows® Control Panel. Touching
the screen or any key will awaken it
from this idle state.
Bottom
Top
* Phone chargers may or may not work
properly with the LDX10 due to possible
differences in charging currents. In addition,
USB ports on desktop computers/laptops are
also inadequate for charging and should not
be used.