User Manual

CONNEX
TM
User Guide
4
Safety Instructions
Do not open the Air Unit or Ground Unit enclosures. There are no user-serviceable parts inside.
Refer servicing to qualified service personnel only. The use of controls, adjustments or procedures
other than those specified in this user guide may result in exposure to shock and/or electrical or
mechanical hazards.
Do not immerse the units in water.
Do not block the air ventilation openings.
Always disconnect a unit’s power by pulling the mains plug.
Only clean with a dry cloth.
Keep powered on units at least 20 cm from your body.
Do not expose the units to moisture or excessive heat. Unit operating temperature is 14122F (or
-1050C).
Do not operate the device at outdoors when in rainy weather conditions or snow and icing
conditions.
Do not operate or store the device in excessive dust conditions, or high humidity conditions.
Unplug the units during lightning storms or when not using them for long periods of time.
Only use the originally approved power supply adapter and only use it indoors.
Only use the supplied accessories or those recommended on the Amimon website. Accessories
(including cables) must not be replaced, as they may affect performance or functionality or
damage the unit. We highly recommend that you use the provided Amimon cables. If an alternate
cable is used, make sure that it is of the highest quality.
Do not use the product if there is any physical damage to the enclosure.
It is normal for the product to become slightly hot during use. However, if the enclosures
temperature becomes unbearable to touch, turn the product off and contact support. The internal
fan of the Air Unit (transmitter) should work at all times when the power is on.
Do not let the product come into contact with corrosive materials.
Do not let the product come into contact with explosives, corrosive gas or nuclear weapons.
Do not let the product come into contact with fire.