User Manual
CONNEX
TM
User Guide
34
4 Press and hold the Link button on the Ground Unit. The following message is then
displayed:
Pairing in progress
After a while, the monitor connected to the Ground Unit should display the video
received from the Air Unit, as described in the
Ground Unit – On Screen Display (OSD)
section on page 28.
Note: If a black screen is displayed (as shown below), then check that the camera on
the aircraft is operating.
To see a list of Ground Units with which an Air Unit is currently paired and
connected:
You may refer to the
Checking the Ground Units Registered to an Air Unit
section on
page 43.
To clear all the Ground Units with which an Air Unit is paired:
You may refer to the
Unregistering All Ground Units
section on page 44.