User Manual

CONNEX
TM
User Guide
29
 Telemetry [Optional], page 30
 Alerts and System Messages, page 32
Default Information Overlaid on Video
By default, the Ground Unit displays the following information overlaid on the bottom of
the video in a black strip:
Figure 31: OSD ON – Default View
 : Distance of the Air Unit from the Ground Unit
 : Video resolution captured by the aircraft camera
 : Air Unit to Ground Unit video signal strength
 : Air Unit power voltage level
By default, this OSD information is enabled (displayed). Pressing the OSD button (shown in
Table 2) on the Ground Unit disables (hides) this OSD information. Pressing this button
again redisplays it.
Default
information
overlay on
video