User Manual

CONNEX
TM
User Guide
24
Air Unit Antenna Mounting Accessories
The Air Unit antenna mounting accessories provide a variety of options for attaching the
two provided flat cable antennas to the aircraft so that they are pointing the towards the
ground (vertical).
Figure 26: Air Unit Cable Antenna Mounting Accessory – With Flat Cable Antenna – Box 2
Figure 27: Front and Back of the Antenna Mount Piece
This Antenna Clamp attaches to the rotary on the Antenna Mount Piece (shown above)
using the provided screw. The Antenna Clamp has two holes through which you can insert
the screw to attach it to the Antenna Mount Piece according to the direction you would like
the antenna to point. Once the Antenna Clamp is connected to the Antenna Mount you can
rotate it in the direction that you require the antenna to point, as shown below:
Figure 28: Rotating the Antenna Clamp versus the Antenna Mount Piece
Antenna Mounting Piece
Antenna Clamp
Antenna
Antenna Cable
Antenna Mounting Screw
Aircraft leg/bar is here
Plastic ties can be threaded through here to
attach this to the aircraft