User Manual

CONNEX
TM
User Guide
10
 Ground Unit: The Ground Unit connects to various types of monitors, video goggles or
a portable video monitor via the HDMI port. This enables the pilot and/or camera
operator to monitor the video transmitted from the Air Unit.
 Pilot: The pilot can view the video on a monitor or wear video goggles connected to
the Ground Unit. Flight control (telemetry) information from the aircraft is overlaid on
the video. The pilot uses a remote flight controller to control the aircraft.
 Camera Operator: The camera operator can hold a portable or PC video monitor on
which the video can be viewed. The camera operator can use a gimbal remote control
to control the aircraft camera’s gimbal through the S.BUS port of the Air Unit.
Key Features
 True full HD 1080P at 60fps
 Up to 1,000 meter range (LOS)
 Zero latency, real-time video
 Extremely resilient 5GHz digital link
 Automatic Frequency Selection (AFS) that fully complies with regulations and
automatically selects the best free frequency available
 Encrypted and secure
 Sturdy design for harsh conditions
 Built-in OSD view with embedded MAVLInk-based telemetry
 Gimbal control over Futaba
®
S.BUS
 Plug-and-Fly, ready to operate out of the box
 DFS support enables multiple free channels, thus boosting robustness
In the Box
CONNEX is comprised of the following components:
 Air Unit (Transmitter), page 11
 Ground Unit (Receiver), page 14