Installation Instructions Monitor Roll Stand w w w . a m i c o .
Preface Important, Please Read Carefully Thank you for your purchase with Amico. This unit is designed for long lasting performance, providing the end user complies with assembly and maintenance procedures. This Instruction Manual is your guide to ensure that you get the best performance out of the equipment. Amico Accessories Inc.
Table of Contents Installation Preparation Installation Parts Requirements Installation Tools Requirements 3-4 5 Installation of Rollstand Roll Stand Assembly (Roll Stand Base Assembly) Roll Stand Installation (Monitor Head Installation) 6 7 Installation of Accessories Basket Installation Handle Installation 8 9 Warranty Information 10 www.amico.
Installation Parts Requirements The list below includes all parts required for installation. Please check the contents of your Roll Stand Package to ensure all parts are included. If any hardware or parts are missing, please contact Amico Accessories Inc. Roll Stand Base Basket Handle Package (Brown Box) Roll Stand Casters and Hardware Kit 1 Monitor Head (PM5 shelf shown) (Right), Hardware Kit 2 Roll Stand Post Hardware Kit 1 contents 3 Amico Accessories Inc.
Installation Parts Requirements The picture below shows what is included in the box. Picture is for reference only, you may receive different contents or the box layout could be different when received. Basket Head Assembly, Castors, and Hardware Packages Handle Package Roll Stand Post Roll Stand Base www.amico.
Installation Tools Requirements The table below lists all the tools required for installation. NOTE: Please ensure that your contents match the list as outlined on the previous pages. If not, please contact Amico Accessories Inc. at 1-877-264-2697 1. HEX Key 3/16" (47.6 mm) – NOT PROVIDED 2. Philips Screw Driver (Star head) – NOT PROVIDED 3. Socket Wrench (1/2" [1.27 cm] Socket) – NOT PROVIDED 4. 1/2" (1.27 cm) Wrench A: Tools 1 2 3 4 5 Amico Accessories Inc.
Roll Stand Installation (Roll Stand Base Assembly) NOTE: Figure 2 is an exploded view of the Roll Stand base assembly. NOTE: DO NOT use a hammer on the casters or the Roll Stand post. 1. Hardware Kit 1 has the necessary hardware for the instructions in this section. (Figure 1) 2. Push locking casters into the base by hand until it clicks in place. Repeat for all 5 casters. 3. Insert the end of the Roll Stand post with the bushing into the Roll Stand base.
Roll Stand Installation (Monitor Head Installation) WARNING: The Roll Stand Monitor Head is rated for up to 20 lbs (9.07 kg). Ensure that the monitor being mounted does not exceed this weight. WARNING: Ensure that there is no gap between the large plastic bushing and the monitor head after assembly. 1. Hardware Package 2 (packaged with selected monitor head) has the hardware necessary for the instructions in this section. 2.
Basket Installation WARNING: DO NOT tighten one screw all the way into the clamp assembly without tightening the other. Only tighten the first screw after the second screw is at least half way into the clamp assembly or the clamp may be damaged. (Figure 4) WARNING: DO NOT overtighten the screws as this may strip the thread. WARNING: The basket is rated for up to 10 lbs (4.547 kg). Ensure the load that is placed in the basket does not exceed this weight. 1.
Handle Installation WARNING: DO NOT tighten one screw all the way in the clamp device without the other. Only tighten the first screw after the second screw is at least half way into the clamp assembly or the clamp maybe damaged. (Figure 7) WARNING: Ensure the clamp device is the correct side up. The rounded edge of the clamp faces up while the more squared edge faces down. The finished side of the handle faces up. (Figure 8) 1. Place the clamp device at the desired height on the Roll Stand post. 2.
Accessories Warranty Policy Amico Accessories warrants all mounting accessories to be free from defects in material and workmanship for a period of twelve (12) months from the date of shipment. Within this period Amico Accessories will repair or replace any part which is proven to be defective. We don’t just send parts and pieces, we replace the product! Amico Accessories will warrant its material to be free from defect for an additional period of four (4) years, five (5) years from the date of shipment.
www.amico.com Amico Accessories Inc. | www.amico.com 85 Fulton Way, Richmond Hill Ontario, L4B 2N4, Canada 71 East Industry Court, Deer Park NY 11729, U.S.A Toll Free Tel: 1.877.264.2697 Toll Free Fax: 1.866.440.4986 Tel:905.763.7778 Fax:905.763.8587 Email: info@amico.com AA-IM-MNTR-RLSTD 10.21.
