Owner manual

Approval Signature Date Phone No.
NOTE:
1. Gases will be manifolded for single point connections from source.
2. All pipes will extend 8” from the top of mounting plate.
3. Pipe stubs diameters are:
- 3/4” dia. for vacuum, WAGD, and AGSS (Type L)
-1/2” dia. for medical air, oxygen, and nitrous oxide (Type L)
-1/2” dia. for nitrogen (Type K)
4. Exact locations of gas terminations on mounting plate will be determined after receiving the booklet.
Mounting Plate to Outlet Detail
8 Amico Pipeline