Approval and Installation Booklet Rigid Stationary Lite Ceiling Column w w w . a m i c o .
ABOUT US Amico Corporation has been a leading manufacturer of Medical Equipment since 1974, selling its products through a global distribution channel from three manufacturing facilities in Canada and the U.S. With a track record of exceeding expectations, Amico is dedicated to developing and manufacturing the most advanced medical equipment for the industrial and global Health Care Industry. With over 9 different divisions, Amico products offer a total hospital solution.
Table of Contents 2 Product Description 3 Cleaning 3 Inspection and Testing 3 Elevation View 4 Device and Accessory Chart 5 Device Placement (Bottom View) 6 Electrical Diagram (Bottom View) 7 Mounting Plate to Outlet Detail 8 Mounting Information 9 Typical Location View 10 Notes 11 Amico Pipeline
Product Description The Rigid-LITE Ceiling Column shall be an Amico Alert-1 series. The shroud is made of 16 gauge stainless steel alloy #304 with a # 4 satin finish, consisting of a removable access panel, stainless steel ceiling collar and a heavy gauge steel mounting plate. All electrical services are provided by means of EMT metal conduits and gas services are type L, oxygen cleaned copper pipes. NOTE: Nitrogen is type K oxygen cleaned copper pipe. Standard dimensions are 14 3/4” x 14 3/4” (374.
Elevation View To accommodate different ceiling heights, Amico Corporation has standardized three different variations. Please select the required nominal column height below: Ceiling Height L1= Nominal Column Height 30” (762mm) 36” (914.4mm) 42” (1066.8mm) L1 Ceiling Height: Ceiling Height Column Height Floor Clearance: Floor Clearance 78" [1981.2mm]* Quantity Finished Floor Line * Recommended Floor Clearance NOTE: Custom heights are available at an additional cost.
Device and Accessory Chart *QD XXX E9-RED PE E10-IVO. Ohmeda / Medaes Compatible Ceiling Column Passive Evacuation (19mm/33mm) CH XXX IMP Chemetron Compatible E11-RED E12-IVO. Single Receptacle 8310-HG 125V/20a (US / International) Passive Evacuation with Impedance Valve (19mm/22mm) (Side Mount Only) E5-RED GJ PB XXX Puritan-Bennett Compatible Duplex Receptacle 8300-HG 125V/20a (US / International) E6-IVO.
Device Placement (Bottom View) Please fill the devices that you require for your application. (Specify by using the symbols on Page 5 of this Approval Booklet.) Please Specify Outlet Language US CAN Positions 1 - 12 = Medical Gas Outlets Posititions A1 - D5 = Electrical and/or communication devices FRENCH SPANISH/US SPANISH/ISO NOTE: 1. A maximum of 2 data provisions only. 2. Multiple of a gas outlet can only be placed in goups. example: OXY (position 1+2 or 1+5).
Electrical Diagram (Bottom View) *Please Select One of the Following: Amico recommended circuit schedule based on layout Custom circuit schedule. Please specify on circuit chart Circuit Chart Receptacle Type: US/CAN *BRITISH (simplex only) *GERMAN (simplex only) *Please specify electrical details: NOTE: Type of wire: THHN XHHW AWG Wire Gauge: RW90 1.
Mounting Plate to Outlet Detail NOTE: 1. Gases will be manifolded for single point connections from source. 2. All pipes will extend 8” from the top of mounting plate. 3. Pipe stubs diameters are: - 3/4” dia. for vacuum, WAGD, and AGSS (Type L) -1/2” dia. for medical air, oxygen, and nitrous oxide (Type L) -1/2” dia. for nitrogen (Type K) 4. Exact locations of gas terminations on mounting plate will be determined after receiving the booklet. Approval Signature 8 Amico Pipeline Date Phone No.
Mounting Information 12" [304.8mm] STRUCTURAL CEILING 6" [152.4mm] RECOMMENDED FINISHED CEILING 1/2" [12.7mm] THREADED ROD TYP. OF 4 BY OTHERS ANTI-SWAY SUPPORT STRUCTURE (SUPPLIED BY OTHERS) 14-5/8" [371.48mm] SQUARE MOUNTING PLATE 18-3/8" [457.2mm] SQUARE CEILING COVER (FIELD INSTALLED) NOTE: 1. All labour and material for installation of mounting plate to mounting structure supplied by others. 2.
Typical Location View 3’ - 4’ [914.4 - 1219.2mm] 3’ - 4’ [914.4 - 1219.2mm] 3’ - 4’ [914.4 - 1219.2mm] 3’ - 4’ [914.4 - 1219.2mm] Approval Signature 10 Amico Pipeline Date Phone No.
www.amico.com Amico Architectural | www.amico.com 85 Fulton Way, Richmond Hill Ontario, L4B 2N4, Canada 71 East Industry Court, Deer Park NY 11729, U.S.A Toll Free Tel: 1.877.264.2697 Toll Free Fax: 1.866.440.4986 Tel: 905.763.7778 Fax: 905.763.8587 Email: info@amico.
