User guide

Approval Signature Date Phone No.

Linear Drive Speci cations

The linear actuators shall be designed for seating and reclining operations. It adjusts the column to the required

level by raising and lowering it.

The drive is provided by a DC motor with worm geat which acts on a trapexoidal threaded spindle drive or ball screw

system.

The actuators shall be protected against overheating by the Magnetic control unit.

Amico actuators shall use a push / pull force. They shall have a self-locking function which is activated by a built-in-

brake. A safety nut shall also prevent overload of the actuator.

All forces shall be transmitted through die-cast metal parts.

Amico products comply with NFPA-99 and CSA Z7396.1.

Push / pull force 1.5N

Speed at 24 V constant 14 mm/s

Stroke 1.97 - 27.56” [50-700 mm]

Voltage 24 DC

Power Consumption 120 W

Current Consumption 24V 5 A

Duty Cycle (ON / OFF) 1 min / 9min. int.

Ambient Temperature 0 / +40 C

Degree of Protection IP66

Protective Tube 1.69” [43 mm]

Weight 3 kg

• high-quality die-cast metal parts, stainless steel push tubes & ultrasonic-welded plastic parts guarantee high

performance

• customizable stroke & mounting lengths in increments of 1.97 - 15.75” [50 - 400mm] & increments of 3.94”

[100mm] over the range of 15.75 - 27.56” [400 - 700mm]; other options are available upon request.

• maintenance free with a long lifetime

• push force us reduced by 50% when operated in parallel with the control unit.

• quiet in running