Operation Manual

20
OPERATION
If activating Booster function causes the overall power limit of a pair to be
exceeded, the heat setting of the other cooking zone in a pair will be automa-
tically reduced.
Booster function control
Two cooking zones arranged vertically form a pair.
Setting the child lock function
The Child Lock function protects the appliance from inadvertent operation by children. The
appliance can be operated once the child lock function has been released.
The child lock function
The child lock function can only be set when the appliance is switched on and none of the
cooking zones or timer is in operation (all displays show „0” and dots are a ashing).
To set the child lock function switch the appliance on using the on/off sensor eld (1), simulta-
neously touch the front right cooking zone selection sensor eld (5) and sensor eld (4) and
once again touch the front right cooking zone selection sensor eld (5). All displays will show
the letter „L” (Locked), which indicates that the Child Lock function has been set. If cooking
zones are still hot, the display will alternate between showing the letters „L” and „H”.
The Child Lock function must be set within 10 seconds and no sensor elds
other than those described above must be touched. Otherwise the Child Lock
function will not be set.
Releasing the child lock function to cook only
Switch the appliance on using the on/off sensor eld (1); all displays will show the letter „L”
(Locked). To release the Child Lock function simultaneously touch the front right cooking zone
selection sensor eld (5) and sensor eld (4). The letters „L” shown on the cooking zone displays
will be replaced with „0.” and a ashing dot. Cooking zones can now be operated. (For details
please see section „Selecting the cooking zone heat setting”).
The Child Lock function remains set until it is released even after the appliance
has been switched off and then switched on again. Disconnecting the appliance
from electrical mains does not release the child lock.