Operation Manual

66
EMERGENCY PROCEDURE
PROBLEM CAUSE ACTION
7. Crack in the ceramic
plate
Danger! Immediately disconnect the ceramic
plate from the mains (fuse) and call the nearest
Customer Service Centre.
8. If the fault still remains Disconnect the ceramic plate from the mains (fuse) and call
the nearest Customer Service Centre.
Important!
You are the person responsible for proper condition and
operation of the appliance in your household. If you call
the Service for a fault which resulted from improper opera-
tion, you will be charged with the costs of the visit even
during the period of warranty. We shall not be held liable
for damages caused by a failure to observe this Manual.
9. The inductive plate emits
hoarse sounds
Normal phenomenon. The fan cooling the electronic sys-
tems is working.
10. The inductive plate
emits whistling sounds
Normalphenomenon.Duetothefrequencyofthecoil
when several hotplates are used at maximum power, the
plate slightly whistles.
11. E2 symbol displayed Induction coil overheated -insufcientcooling,
- verify if the induction hob is
built in according to instruc-
tions.
12. Er03 symbol displayed Sensoreldscoveredbymore
than 10 seconds, the appliance
switches itself off.
Clean the touch control panel
surface and remove items
placedonsensorelds.