Operation Manual

56
OPERATION
Automatic warm-up function
• Selecttherequiredcookingzone(3) so
that the display shows 0. (the dot is
on).
• Selecttheheatsetting9” by sliding your
finger across the heat setting selection
sensor field (2).
• Touchtheheatsettingselectionsensor
field (2) again to confirm the selected heat
setting 9”. The display will immediately
show the letter „
• Now,selectthe desiredheat settingby
sliding your finger across the heat setting
selection sensor field (2).
The display of the relevant cooking zone will
alternate between showing the letter and
the desired heat setting selected.
After a certain time of operation at boosted
power, the cooking zone switches back to
the heat setting set, which will be shown
on the display.
If automatic warm-up function is
activated and „0” heat setting is
selected or no heat setting selec-
tion is made within 3 seconds, the
automatic warm-up function will
deactivate.
If a pot is lifted from the cooking
zone and replaced before the warm-
up countdown is completed, the
warm-up function will resume
and countdown will continue until
completed.
Heating power
Automatic extra
warming duration
(minutes)
-
1 0,8
2 2,4
3 3,8
4 5,2
5 6,8
6 2,0
7 2,8
8 3,6
9 0,2
A
A
3
2
3
2