Operation Manual

54
OPERATION
Releasing the child lock function to cook only
Switch the appliance on using the on/off sen-
soreld(1); all displays will show the letter „L
(Locked). To release the Child Lock function
simultaneously touch the front right cooking
zone selection sensor eld(3) and booster
functionsensoreld(6). The letters „Lshown
on the cooking zone displays will be replaced
with 0.”andaashingdot.Cookingzones
can now be operated. (For details please see
section Selecting the cooking zone heat
setting”).
Releasing the child lock function
Switch the appliance on using the on/off sensor
eld (1); all displays will show the letter L
(Locked). To release the Child Lock function
simultaneously touch the front right cooking
zone selection sensor field (3) and booster
functionsensoreld(6) and once again touch
the front right cooking zone selection sensor
eld(6). The appliance will switch itself off (all
displays are out).
The Child Lock function must be
released within 10 seconds and
no sensors elds other than those
described above must be touched.
Otherwise the Child Lock function will
not be released. If the Child Lock func-
tion has been released successfully,
0” and aashing dot will be shown
on all displays once the appliance is
switched on using the on/off sensor
eld (1). If cooking zones are still hot,
the display will alternate between
showing „0” and the letter „H”.
The Child Lock function remains
set until it is released even after the
appliance has been switched off and
then switched on again. Disconnec-
ting the appliance from electrical ma-
ins does not release the child lock.
1
6
3
1
6
3