Operation Manual

15
OPERATION
Using double and triple ring cooking zone.
Double and triple ring cooking zone can
be activated by touching the (5) sensor
eld. Operation of the double and triple ring
cooking zone is indicated by red LED pilot
lights (6).
To deactivate the double and triple ring co-
oking zone touch the (5) sensor eld again.
Setting the heating power
In order to set the heat setting, rst select the
desired cooking zone using the cooking zone
selector sensor (2). When the cooking zone
display (3) shows „ .”, start setting the desi-
red heat setting by sliding your nger across
the setting selection sensor eld (4).
Double and triple ring cooking zone can be only activated when the main
cooking zone is operating.
Switching off selected cooking zone
Selected cooking zone may be switched off
in the following way:
1. Select the desired cooking zone using the
cooking zone selection sensor eld (2).
2. Slide your nger across the setting se-
lection sensor eld (4) to reduce the heat
setting to „0”.
The letter „H” appears on the indicator sym-
bolising residual heat.
5
4
3
3
6
6
2
4
2
2
3
3
3
3
2
4
2
2
3
3
3
3
If none of the sensor elds is touched within 10 seconds, the cooking zone
switches off.
A cooking zone is active when a dot is displayed by the number „ ” on the
cooking zone display. This indicates a cooking zone is ready for the heat setting
to be set or changed.