Operation Manual

16
OPERATION
Cooking heat
setting
Fast cooking time
(min)
-
1 1
2 3
3 4,8
4 6,5
5 8,5
6 2,5
7 3,5
8 4,5
9 -
8
3
3
3
3
4
8
3
3
3
3
4
8
3
3
3
3
4
8
3
3
3
3
4
Automatic warm-up function
If you do not start to select the heat setting within 10 seconds, then the letter
„A” vanishes and the automatic warm-up function is inactive.
If you do not wish the automatic warm-up function to operate, start selecting
the heat setting by touching the (+)(5) sensor eld.
Each cooking zone is equipped with an auto-
matic warm-up function. When this is activated,
then the given cooking zone is switched on at full
power for a time depending on the heat setting
selected, and is then switched back to the heat
setting originally set.
Activate the automatic warm-up function by
setting the desired heat setting by touching the
(-)(4) sensor eld rst. Then the heat setting
„9” is displayed intermittently on the cooking
zone display (3) with the letter “A” for around
10 seconds.
If you start to select the heat setting within 10
seconds by touching the (-)(4) sensor eld, then
the automatic warm-up function is activated and
the letter „A” is displayed intermittently with the
cooking zone’s heat setting selected for as long
as the function is activated.
The cooking heat setting can be now changed at
any moment using the method described above
in the „Setting the heating power” section.