Operation Manual

15
OPERATION
Using double ring cooking zone
Double ring cooking zone can be activated
by touching the (6) sensor eld. Operation of
the double ring cooking zone is indicated by
a red LED pilot light (6a).
To deactivate the double ring cooking zone
touch the (6) sensor eld again.
Setting the heating power
In order to set the heat setting, rst select the
desired cooking zone using the cooking zone
selector sensor (2). Then, when the cooking
zone display (3) shows „ ”, start setting the
desired heat setting using the (+)(5) or (-)(4)
sensor eld.
If you do not wish the automatic warm-up
function to operate, start the heat setting
selection by touching the (+)(5) sensor
eld rst. You can then gradually increase
the heat setting by operating the (+)(5)
sensor eld, or lower the heat setting by
operating the (-)(4) sensor eld.
If, however, you do wish to cook using
the automatic warm-up function, start
heat setting selection by touching the (-)
(4) sensor rst.
(see „Automatic warm-up function”).
Double ring cooking zone can be only activated when the main cooking zone
is operating.
6
3
3
6a
4
5
6a
2
2
2
3
3
3
3
4
5