Operation Manual

OPERATION

Switching on the appliance

When the appliance is switched off then all the

cooking zones are disconnected and the indicators

are off. Touch the on/off sensor eld (1) to switch on

the appliance. „0” will appear on all cooking zone

displays (3) for 10 seconds. After selecting a desired

cooking zone by touching the cooking zone selector

sensor eld (2) (see „Setting the heating power”),

now the desired heat setting can be selected using

the (+)(5) or (-)(4) sensor elds .

If none of the sensor elds is touched within 10 seconds, the appliance swit-

ches itself off.

If child lock function is activated, the appliance cannot be switched on (see

„Releasing the child lock”).

Switching on the cooking zones

Control Panel

When the cooking surface is connected to the

electricity mains, the pilot light should light up

briey above the child lock sensor eld (7), after

which the appliance can be switched on.

No objects should be placed on the sensor elds (this could cause an error).

Touch sensor elds should be always kept clean.

After switching on the appliance using the on/off

sensor eld (1) cooking zones can be operated

as follows:

1. Select the desired cooking zone using the

cooking zone selector sensor eld (2). (Sensor

eld layout reects the layout of individual co-

oking zones),

2. Set the desired heat setting using the (+)(5) or

(-)(4) sensor elds,

3. To change the heat setting again as described

in point 1, select the desired cooking zone using

the cooking zone selector sensor eld (2), and

then set the desired heat setting using the (+)

(5) or (-)(4) sensor elds.

If none of the sensor elds is touched within 10 seconds, the cooking zone

switches off.

A cooking zone is active when a dot is displayed by the number „ ” on the

cooking zone display. This indicates a cooking zone is ready for the heat setting

to be set or changed.