Operation Manual

12
INSTALLATION
Installing the hob in worktop opening
● Use four “A” brackets for 38 mm thick worktops. Fit the hob into worktop opening as shown
ongure2and3.Toproperlysecurehobin28mmthickworktop,usefour15x15x50mm
wooden blocks in addition to “A” brackets. Fit the hob into worktop opening as shown on
gure4and5.
● Checkifadhesivesealisproperlyappliedtothehob'sange.
● Looselyattachxingbracketstothebottomofthehob
● Removedustfromtheworktop,inserthobintotheopeningandpressinrmly,
● Positionxingbracketsperpendicularlytothehob'sedgeandtightenrmly.
1 - worktop
2 - screw
3-xingbracket
4 - hob
5 - seal
54
321
2
3
290
560
490
min
60
min
50
290