Operation Manual

OPERATION
Touch navigationsensoreldstochange
the temperature. Temperature range and
default temperature are described in section
Menu \ Heating functions. Select the desired
temperature and touch .sensoreldto
conrm.Aftertouchingthe .sensoreld,
thermometersymbolstopsashing.Atthe
sameovenlevelsymbolstartashingandit
is possible to modify it.
If no changes are made within 3 minutes,
the appliance exits to uppermenu (User
Programmes) and stores settings last shown
onthedisplay.Onlychangesconrmedby
touching are updated.
Touch navigationsensoreldstochange
the oven level. Select the desired oven level
and touch sensoreldtoconrm.
After touching the sensoreld,ovenlevel
symbolstopsashing.Atthesame cook
timesymbolstartashinganditispossible
to modify it. If no changes are made within 3
minutes,theapplianceexitstouppermenu
(User Programmes) and stores settings last
shown on the display. Only changes con-
rmedbytouching are updated.
Touch navigation sensor fields to
change the cook time. Select the desired
cook time and touch sensoreldtocon-
rm.After this, allselected andconrmed
parameters are stored by the appliance and
the appliance exits to uppermenu (User
Programmes).
When you re-enter P01 from the user pro-
grammes menu the appliance displays the
last saved settings. Editing the settings for
other programmes (P02-P10) is done in the
same way.
Touch or  sensoreldto change time
and temperature settings respectively during
operation of a user program.
28