Operation Manual

The appliance display shows the following
information when a program is in progress:
You can modify temperature settings for
chamber oven or end time at any time,
however, making any changes will modify
the preset program. Modifying temperature
or time: or stopsashing)changesthe
chicken cooking programme into turbo grill
programme and chicken symbol in the upper
left corner of the display changes to turbo grill
symbol.Touch . to stop the programme at
any time. After this, the appliance switches
to standby mode.
Once the cook time proportional to entered
chickenweightelapses,allfunctionsexcept
cooling fan are turned off (see: Cooling fan
operation) and an acoustic signal is sounded
(4 beeps / pause / 4 beeps). The sequence
is repeated every 3 seconds for about 5
minutes.
The display shows the temperature set for
the oven chamber and END TIME and
symbolisashing.
Touch to acknowledge and mute the
acoustic signal. After this, the appliance
switches to standby mode.
12
Example: using a preset program with
oven preheating
SelectPastriesmenuandconrmbytouch-
ing , The following types of pastries are
available: crumble cake, fruit cake, Swiss roll,
spongecake,mufns,cookies,bread
SelectSwissrollandaconrmselectionby
touching . The following screen is displayed
showing the default temperature of 200°C
andinactivecooktime(00:10)inbox2.
If no changes are made within 3 minutes, the
appliance switches to standby mode.
Touch . to start the programme. Oven start
preheating to 200°C.
Once the desired temperature of 200°C is
reached, an acoustic signal is sounded (2
beeps / pause / 2 beeps) and . symbol is
ashing. Box 2 showingcook time of 0:10
time is now active. The sequence is repeated
every 3 seconds for about 5 minutes. Tem-
perature of 200°C is maintained in oven
chamber.
Place food in the open, close the door
and touch sensor eld to startthe pro-
gramme.
12
25
OPERATION