Operation Manual

12
OPERATION
Electronic programmer
 functions
1 – functionselectionbutton
2 – “–”sensor
3 – “+”sensor
Setting the time
Afterconnectiontothemainsorreconnec-
tionafterapowercutthedisplayshowsash
Timer
Thetimercanbeactivatedatanytime,re-
gardlessofthestatusofotherfunctions.The
timercanbesetforfrom1minutetoupto23
hoursand59minutes.
Tosetthetimeryoushould:
Presssensor1,thenthedisplaywillshow
ashing,
Presssensor1,thenthedisplaywillshow
,
setthetimeusingsensors3and2.
7 seconds after the time has been set the
newdatawillbesaved.
Caution!
Ifthecorrecttimeisnotsetthenproperopera-
tionoftheovenisnotpossible.
setthetimerusingsensors3and2.
Thetimesetisshownonthedisplayandthe
signalfunctionison.
Presssensor1,2or3inordertoswitchoff
thesignal,thesignalfunctionwillgooutand
thedisplaywillshowthecurrenttime.
Caution!
Ifthealarmsignalisnotturnedoffmanually,
itwillbeturnedoffautomaticallyafterapprox.
7minutes.
The electronic prgrammer isequipped with
electronicsensorswhichareswitchedon by
touchingorpressingthesensorsurfaceforat
leastonesecond.
Each sensor reaction is confirmed by the
beep.
Keepthesensorsurfacecleanatalltimes.
132
132