Operation Manual

10
INSTALLATION
● Theoven ismanufactured to work with
a one-phase alternating current (230V
1N~50 Hz) and is equipped with a 3
x 1,5 mm
2
 connection lead of 1.5 mm
lengthwithaplugincludingaprotection
contact.
● Aconnectionsocketforelectricitysupply
should be equipped with a protection
pin and may not be located above the
cooker.Afterthecookerispositioned,itis
necessarytomaketheconnectionsocket
accessibletotheuser.
● Beforeconnectingtheoventothesocket,
checkif:
-thefuseandelectricitysupplyareableto
withstandthecookerload,
-theelectricitysupplyisequippedwithan
efcaciousgroundsystemwhichmeets
the requirements of current standards
andprovisions,
-theplugiswithineasyreach.
Electrical connection
Important!
Ifthexedpowersupplycableisdamaged,
it should be replaced at the manufacturer
oratanauthorizedservicingoutlet,orbya
qualiedpersontoavoiddanger.