Operation Manual
37
TROUBLESHOOTING
In the event of any fault:
turn off the appliance,
disconnect the power supply,
based on the instructions given in the table below, some minor issues can be corrected
by the user. Please check the consecutive points in the table before you refer the repair
to customer service.
Problem Reason Remedy
1. The appliance does not work no power check the fuse, replace if blown
2. Oven lighting does not work. loose or damaged bulb Replace the blown bulb (see
Cleaning and Maintenance sec-
tion)
3. E0 error Oven temperature reading error You cannot use the oven, please
refer the repair to the nearest
service centre.
4. E1 error Meat probe temperature read-
ing error
The message disappears once
the meat probe is unplugged.
The oven can be used without
the meat probe
5. Fan does not work Risk of overheating! Immediately unplug the appliance or switch
off the main circuit breaker. Refer the repair to the nearest service
centre.
If the problem is not solved, disconnect the power supply and report the fault.
Important!Allrepairsmustbeperformedbyqualiedservicetechnicians.