Operation Manual

OPERATION
18
Light
The sensor operates independently and
using it does not affect other functions and
settings. sensor is inactive in a standby
mode.
The light in the oven turns on:
- when you touch —for30seconds;
- when you touch and hold for 3s – until
the appliance enters standby mode,
when you use any heating function or a pre-
setprogramme—for30s;
when"fastheat-up"completes—for30s;
whenyouopenthedoor—untilthedooris
closed, but no longer than for 10 minutes.
Touch to turn off the light at any time.
Cooling fan.
Cooling fan operates independently of the
set functions and the appliance status.
Cooling fan turns on when the oven cham-
ber temperature exceeds 50°C and turns off
when it is below this temperature.
Thermostat
Thermostat symbol (next to the oven tem-
perature) indicates the operating status of
heaters. If any of the heating elements oper-
ates, the symbol lights up. The symbol
goes out, if none of the heating elements
operates (e.g. when the oven reaches the
desired temperature and the heating ele-
ments are disconnected until the tempera-
ture drops).
Heating functions
Touch to select heating functions. You
can use the following controls:
– open pre-set programmes menu (clear
unconrmedsettings);
 – open timer menu (clear unconrmed
settings);
– go back. If you are on the main screen
– clear settings and enter operating mode.
, – navigate the menu;
OK–conrm.
[donothingfor20s]-ifyoudonothingfor20
seconds, settings are cleared and the appli-
ance enters operating mode.
The text display (left) shows the message
"Select heating function >" and ">" is blink-
ing. Heating functions are displayed se-
quentially.ThedefaultfunctionisFancook-
ing. Note: Rotisserie functions only appear
on appliances that feature rotisserie. Out of
the three cleaning function available only
the active function is displayed, depending
on the pyrolysis settings.
In addition to accompanying functions, dif-
ferent oven chamber outline symbols are
displayed reecting the selected heating
function. Touch or to select and then
OKtoconrm.
Once your selection is made, it is displayed
on the left side while the right side is blank.
The default oven temperature ashes.
Touch or  to adjust temperature and
thenOKtoconrm.
If meat probe is detected, the appliance will
ask you to select its temperature. Touch
or toadjustdefaultmeatprobetempera-
tureof80°CandthenOKtoconrm.
This step is omitted if no meat probe is de-
tected.
Oven light is on switches, and you can use
and sensors. Other functions start af