User's Manual

AMIC A9281-A-000 User Guide
© AMIC Dec. 2005 – All rights reserved p 6 of 17 Rev 1.0
5. Install AMIC A9281-A-000 GUI Utility on PDA
1. Make sure that the required PDA synchronization software has been installed on
your PC.
2. Turn on your PC and wait for it to boot up completely.
3. Connect your PDA to your PC through PDA manufacturer recommended method.
(either through cradle, USB cable, or etc)
4. Establish communication between your PC and your PDA.
5. Put the device driver / GUI utility CD in your PC’s CD-ROM drive.
6. Use Window’s Explorer on PC to go to the Demo Software directory on the CD-
ROM.
7. Copy Rfid14443Dv1.0.exe from the Demo Software directory on the CD-ROM to
the Mobile Device directory.
8. After Rfid14443Dv1.0.exe is copied from PC to the PDA, you should be able to
see the file, Rfid14443Dv1.0.exe, listed on PDA’s File Explorer.
Figure – 3